IMAGE QUALITY SETTING (Movie Recording)

Adjust image quality settings for movies.

To display image quality settings, press MENU/OK in the movie shooting display and select the H (IMAGE QUALITY SETTING) tab.

The options available vary with the shooting mode selected.

FFILM SIMULATION

Options are the same as those for still photography, but settings must be adjusted separately (aFILM SIMULATION (Still Photography)).

Options are the same as those for still photography, but settings must be adjusted separately (aMONOCHROMATIC COLOR).

Options are the same as those for still photography, but settings must be adjusted separately (aWHITE BALANCE (Still Photography)).

Choose a dynamic range for movie recording.

AUTO (automatic dynamic range control) is not available during movie recording.

W200% is available at sensitivities of from ISO 250 to ISO 12800, X400% at sensitivities of from ISO 500 to 12800.

This item is available when t is selected for BMOVIE SETTING > F-Log/HLG RECORDING.

Options are the same as those for still photography, but settings must be adjusted separately (aTONE CURVE (Still Photography)).

Options are the same as those for still photography, but settings must be adjusted separately (aCOLOR (Still Photography)).

Options are the same as those for still photography, but settings must be adjusted separately (aSHARPNESS (Still Photography)).

Options are the same as those for still photography, but settings must be adjusted separately (aHIGH ISO NR (Still Photography)).

Select AUTO to automatically adjust interframe noise reduction according to shooting conditions.

Options
AUTO	OFF

“Ghosting” may occur with moving subjects or if the camera is moved during shooting.

Select ON to enable peripheral illumination correction during movie recording.

Options
ON	OFF

Select OFF if you notice banding in movies recorded using this option.