Enter a search term and click .

Adjust the camera's sensitivity to light.


Press the sensitivity dial lock release, rotate the dial to the desired setting, and press the release again to lock the dial in place.

Option Description
A (auto) Sensitivity is automatically adjusted in response to shooting conditions according to option chosen for ASHOOTING SETTING > ISO AUTO SETTING. Choose from AUTO1, AUTO2, and AUTO3.
C (command) Rotate the front command dial to choose from AUTO1, AUTO2, AUTO3, and values of from 64 to 51200. This range includes “extended” values of 64 to 100, 25600, and 51200. Note that “extended” values may reduce dynamic range or increase mottling.
125-12800 Adjust sensitivity manually. Selected value is shown in display.

Adjusting Sensitivity

High values can be used to reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken at high sensitivities.

AUTO

Use ASHOOTING SETTING > ISO AUTO SETTING to choose the base sensitivity, maximum sensitivity, and minimum shutter speed for the A position on the sensitivity dial. Settings for AUTO1, AUTO2, and AUTO3 can be stored separately; the defaults are shown below.

Options

Item Options
DEFAULT SENSITIVITY 125–12800
MAX. SENSITIVITY 400–12800
MIN. SHUTTER SPEED 1/8000–30 SEC, AUTO

Default

Item AUTO1 AUTO2 AUTO3
DEFAULT SENSITIVITY 125
MAX. SENSITIVITY 800 3200 12800
MIN. SHUTTER SPEED AUTO

The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for MIN. SHUTTER SPEED.

If the value selected for DEFAULT SENSITIVITY is higher than that selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY.

The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY.

If AUTO is selected for MIN. SHUTTER SPEED, the camera will choose the minimum shutter speed automatically. The minimum shutter speed is not affected by the option selected for image stabilization.