Enter a search term and click .

Exposure Compensation

Adjust exposure.

Rotate the rear command dial to adjust exposure.

The command dial used in this role can be chosen using DBUTTON/DIAL SETTING > COMMAND DIAL SETTING.

In manual mode, exposure can be adjusted by rotating the front or rear command dial after pressing a control to which dWHEN SET TO B(ON/OFF SWITCH) is assigned.

The amount of compensation available varies with the shooting mode.

Exposure compensation can be previewed in the shooting display, although the display may not accurately reflect its effects if:

  • the exposure compensation amount exceeds ±3 EV,
  • W200% or X400% is selected for DYNAMIC RANGE, or
  • STRONG or WEAK is selected for D RANGE PRIORITY.

Exposure compensation can still be previewed in the viewfinder or LCD monitor by pressing the shutter button halfway. In movie mode, the display may not accurately reflect the effects of exposure compensation during F-log recording or when W200% or X400% is selected for FDYNAMIC RANGE. An accurate preview can be obtained by selecting mode M and adjusting exposure directly.