IMAGE QUALITY SETTING (Movie Recording)
Adjust image quality settings for movies.
To display image quality settings, press MENU/OK in the movie shooting display and select the H (IMAGE QUALITY SETTING) tab.
The options available vary with the shooting mode selected.
FFILM SIMULATION
Options are the same as those for still photography, but settings must be adjusted separately (aFILM SIMULATION (Still Photography)).
FMONOCHROMATIC COLOR
Options are the same as those for still photography, but settings must be adjusted separately (aMONOCHROMATIC COLOR).
FWHITE BALANCE
Options are the same as those for still photography, but settings must be adjusted separately (aWHITE BALANCE (Still Photography)).
FDYNAMIC RANGE
Choose a dynamic range for movie recording.
Option | Description |
---|---|
V100% | See “DYNAMIC RANGE”. |
W200% | |
X400% |
AUTO (automatic dynamic range control) is not available during movie recording.
W200% is available at sensitivities of from ISO 250 to ISO 12800, X400% at sensitivities of from ISO 500 to 12800.
This item is available when cP YP is selected for BMOVIE SETTING > F-Log/HLG RECORDING.
FTONE CURVE
Options are the same as those for still photography, but settings must be adjusted separately (aTONE CURVE(Still Photography)).
FCOLOR
Options are the same as those for still photography, but settings must be adjusted separately (aCOLOR (Still Photography)).
FSHARPNESS
Options are the same as those for still photography, but settings must be adjusted separately (aSHARPNESS (Still Photography)).
FHIGH ISO NR
Options are the same as those for still photography, but settings must be adjusted separately (aHIGH ISO NR (Still Photography)).
INTERFRAME NR
Select AUTO to automatically adjust interframe noise reduction according to shooting conditions.
Options | |
---|---|
AUTO | OFF |
“Ghosting” may occur with moving subjects or if the camera is moved during shooting.
FPERIPHERAL LIGHT CORRECTION
Select ON to enable peripheral illumination correction during movie recording.
Options | |
---|---|
ON | OFF |
If ON is selected when a lens that does not transmit data to the camera is attached, peripheral illumination will be adjusted according to the option selected for HIMAGE QUALITY SETTING > xFMOUNT ADAPTOR SETTING > PERIPHERAL ILLUMINATION CORRECTION in the shooting menu (aPeripheral Illumination Correction).
Select OFF if you notice banding in movies recorded using this option.
xFMOUNT ADAPTOR SETTING
This item is also found in the photo menus (axFMOUNT ADAPTOR SETTING (Still Photography)). Changes to one apply to the other.