.MOVIE SETTING (Movie Recording)
Adjust movie-recording options.
To display options for movie recording, press MENU/OK in the movie shooting display and select the B (MOVIE SETTING) tab.
MOVIE MODE
Choose a frame rate for movie recording.
| Options | |||
|---|---|---|---|
| i1080/29.97P | i1080/25P | i1080/24P | i1080/23.98P |
FIX MOVIE CROP MAGNIFICATION
Fix the movie crop ratio at 1.1∶1. This makes it easier to match crops after changing movie settings.
| Options | |
|---|---|
| ON | OFF |
FULL HD MOVIE OUTPUT
Choose the destination for Full HD movies shot while the camera is connected to an HDMI device.
| Option | Description |
|---|---|
| bFHD YFHD | Full HD movies are output to the HDMI device and recorded to the camera memory card. |
| b— YFHD | Full HD movies are not recorded to the camera memory card but are output to the HDMI device. |
When OFF is selected for HDMI OUTPUT INFO DISPLAY, movies will be output to the HDMI device in 4:2:2 10-bit format.
HDMI OUTPUT INFO DISPLAY
If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display.
| Options | |
|---|---|
| ON | OFF |
HDMI REC CONTROL
Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording.
| Options | |
|---|---|
| ON | OFF |
F PHOTOMETRY
Options are the same as those for still photography, but settings must be adjusted separately (aMetering).
FIS MODE
Turn image stabilization on or off.
| Option | Description |
|---|---|
| IBIS/OIS | Enable in-body (IBIS) and optical (OIS) image stabilization. IBIS is used with lenses that do not support OIS. |
| IBIS/OIS + DIS | Enable in-body (IBIS), optical (OIS), and digital (DIS) image stabilization. The crop is adjusted according to the option selected for MOVIE MODE. |
| OFF | Image stabilization off; x appears in the display. Choose when the camera is mounted on a tripod or otherwise fixed in place. |
The setting selected with the lens image stabilization switch, if any, takes priority over the setting chosen with the IS mode.
Note that vibration or camera sounds may be noticeable as image stabilization takes effect.
FIS MODE BOOST
Choose the image stabilization level.
| Option | Description |
|---|---|
| ON | Suitable for hand-held shooting with no panning. |
| OFF | Suitable for hand-held shooting with panning. |
Assigning IS MODE BOOST to a function button allows the image stabilization level to be changed while recording is in progress (aFunction Controls).
FISO
Adjust the camera’s sensitivity to light.
| Option | Description |
|---|---|
| 200–6400 | Adjust sensitivity manually. Selected value is shown in display. |
| AUTO | Sensitivity is automatically adjusted in response to shooting conditions. |
ZEBRA SETTING
Highlights that may be overexposed are shown by zebra stripes in the movie mode display.
| Option | Description |
|---|---|
| ZEBRA RIGHT |  Right-slanting stripes. |
| ZEBRA LEFT |  Left-slanting stripes. |
| OFF | Stripes off. |
ZEBRA LEVEL
Choose the brightness threshold for the zebra stripe display.
| Options | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 |
MOVIE OPTIMIZED CONTROLoL
Select ON to allow movie settings to be adjusted using only the command dials and touch-screen controls. You may find this helpful in preventing the sounds of camera controls being recorded with movies (aMOVIE OPTIMIZED CONTROLoL).
| Options | |
|---|---|
| ON | OFF |
TALLY LIGHT
Choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady.
Indicator lamp
AF-assist illuminator
| Option | Description |
|---|---|
| FRONT OFF REARz |
The indicator lamp lights during movie recording. |
| FRONT OFF REARy |
The indicator lamp blinks during movie recording. |
| FRONTz REARz |
The indicator and AF-assist lamps light during movie recording. |
| FRONTz REAR OFF |
The AF-assist lamp lights during movie recording. |
| FRONTy REARy |
The indicator and AF-assist lamps blink during movie recording. |
| FRONTy REAR OFF |
The AF-assist lamp blinks during movie recording. |
| FRONT OFF REAR OFF |
The indicator and AF-assist lamps remain off during movie recording. |
FEDIT/SAVE CUSTOM SETTING
Options are the same as those for still photography, but settings must be adjusted separately (aEditing Custom Settings).
AUTO UPDATE CUSTOM SETTING
This item is also found in the photo menus (aAUTO UPDATE CUSTOM SETTING (Still Photography)).
xFWIRELESS COMMUNICATION
This item is also found in the photo menus (axFWIRELESS COMMUNICATION (Still Photography)).
