.POWER MANAGEMENT
Adjust power management settings.
To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT.
AUTO POWER OFF
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually.
| Options | |||||
|---|---|---|---|---|---|
| 5 MIN | 2 MIN | 1 MIN | 30 SEC | 15 SEC | OFF |
SHOOTING STAND BY MODE
Choose the delay before the camera enters shooting standby mode.
| Option | Description |
|---|---|
| 5 MIN | The camera will suspend all functions and enter powering-saving (standby) mode if no operations are performed for the selected period. To exit shooting standby mode, press the MENU/OK button or another control. |
| 2 MIN | |
| 1 MIN | |
| 30 SEC | |
| 15 SEC | |
| OFF | Shooting standby mode disabled. |
AUTO POWER SAVE
If ON is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls.
| Options | |
|---|---|
| ON | OFF |
AUTO POWER OFF TEMP.
If its temperature rises beyond a certain point, the camera will first display a message and then, if the temperature rise continues, automatically end shooting and power down. Choose the temperature at which the camera turns off automatically.
| Option | Description |
|---|---|
| STANDARD | The camera turns off automatically when its temperature reaches the STANDARD value. |
| HIGH | Shooting can continue at temperatures higher than the STANDARD value, extending the time available to record movies and the like. Because remaining in contact with the camera at these high temperatures could result in low-temperature burns, this option should only be used after mounting the camera on a tripod or taking other steps to avoid prolonged contact with the camera. |
