Errors

If a C or B icon appears in the display, select INFORMATION > ERROR DESCRIPTION in the network/USB setting menu to view the error and then take the appropriate action.

Error	Solution
NOT CONNECTED TO NETWORK VIA WIRELESS LAN	No connection to access point: Confirm that the access point is on, verify its settings and IP address, and check that there are no obstructions blocking its signal. If necessary, move the camera closer to the access point. Camera settings have not been correctly adjusted for connection to the access point: Check that the password, encryption type, and SSID match those chosen for the access point.
IP ADDRESS CANNOT BE ASSIGNED BY DHCP SERVER OR THERE IS AN ISSUE WITH IP ADDRESS SETTING PLEASE CHECK SETTINGS	No DHCP server: If there is no DHCP server on the network, enter the IP address and other information manually. The DHCP server is down: Contact the network administrator.
CANNOT REACH FTP SERVER OR COMMUNICATE WITH FTP SERVER PLEASE CHECK SETTINGS	Duplicate IP address: Change the camera IP address to ensure that it does not duplicate the address of any other device on the network. Invalid IP address: If the network includes a DHCP server, select auto address allocation. If IP addresses are assigned manually, check that the IP address is correct. The DNS server address is incorrect: If you configured the DNS address manually, be sure the information you entered is correct. FTP server settings are incorrect: Check that the server type, server address, port number, and proxy settings are correct. The FTP server is down: Contact the network administrator.
LOGIN TO FTP SERVER HAS FAILED	Incorrect user name or password: Check that you have supplied the correct user name and password.
CANNOT TRANSFER OR SAVE FILES TO FTP SERVER	FTP server permissions are configured incorrectly: Check that you have write access to the FTP server. The FTP server is full: Check the amount of free storage space remaining on the FTP server.
CA ROOT CERTIFICATE IS INVALID	The root certificate has expired: After confirming that the camera clock is set to the correct time and date, load an updated CA root certificate.
Frame.io DISCONNECTED	The Frame.io server may be down: Check that the Frame.io server is up or try again later. The camera clock is not set to the correct time and date: Set the camera clock. The network is not configured correctly: Check the settings of the connected network. Turn the camera off and then on again. Contact the network administrator.
UNEXPECTED ERROR HAS OCCURRED	Turn the camera off and then on again. Contact the network administrator.