.BUTTON/DIAL SETTING
Access options for camera controls.
To access control options, press MENU/OK, select the D (SET UP) tab, and choose BUTTON/DIAL SETTING.
FOCUS LEVER SETTING
Choose the functions performed by the focus stick (focus lever).
| Option | Description |
|---|---|
| LOCK (OFF) | The focus stick cannot be used during shooting. |
| PUSH n TO UNLOCK | Press the stick to view the focus-point display and tilt the stick to select a focus point. |
| ON | Tilt the stick to view the focus-point display and select a focus point. |
xEDIT/SAVE QUICK MENU (
)
Choose the items displayed in the quick menu during still photography (aThe Quick Menu).
FEDIT/SAVE QUICK MENU ()
Choose the items displayed in the quick menu when filming movies (aThe Quick Menu).
FUNCTION (Fn) SETTING ()
Choose the roles played by the function buttons (aFunction Controls).
COMMAND DIAL SETTING ()
Choose the roles played by the command dials.
| Option | Description |
|---|---|
| FRONT COMMAND DIAL 1 |
Assign shutter speed (S.S. (PROGRAM SHIFT)) or aperture (APERTURE) * to FRONT COMMAND DIAL 1. |
| FRONT COMMAND DIAL 2 |
Assign shutter speed (S.S. (PROGRAM SHIFT)), aperture (APERTURE) *, sensitivity (ISO), or no role (NONE) to FRONT COMMAND DIAL 2 or FRONT COMMAND DIAL 3. |
| FRONT COMMAND DIAL 3 |
|
| REAR COMMAND DIAL | Assign shutter speed (S.S. (PROGRAM SHIFT)), aperture (APERTURE) *, sensitivity (ISO), or no role (NONE) to the rear command dial. |
| EXP. COMPENSATION ASSIGNMENT | Exposure compensation can be adjusted using either or both of the front and rear command dials while the d (exposure compensation) button is pressed. |
* Aperture ring rotated to A or C in mode A (aperture-priority AE) or M (manual).
COMMAND DIAL SETTING can also be accessed by pressing and holding the center of the front command dial.
You can also press the center of the front command dial to cycle through settings in the order FRONT COMMAND DIAL 1, FRONT COMMAND DIAL 2, and FRONT COMMAND DIAL 3.
The selected option also applies to the vertical-grip command dials.
COMMAND DIAL DIRECTION ()
Choose the direction in which the command dials are rotated to choose values. Settings for the front and rear command dials can be adjusted separately.
| Option | Description |
|---|---|
| - ––––– + | Rotate the dial right for higher values or to move to the next item. |
| + ––––– - | Rotate the dial left for higher values or to move to the next item. |
SHUTTER AF
Choose whether the camera focuses when the shutter button is pressed halfway.
AF-S
| Option | Description |
|---|---|
| ON | Focus locks when the shutter button is pressed halfway. |
| OFF | No focus operation is performed when the shutter button is pressed halfway. |
AF-C
| Option | Description |
|---|---|
| ON | The camera focuses while the shutter button is pressed halfway. |
| OFF | No focus operation is performed when the shutter button is pressed halfway. |
SHUTTER AE
If ON is selected, exposure will lock while the shutter button is pressed halfway. The setting for focus mode C (AF-C) can be adjusted separately from that for modes S (AF-S) and M (manual focus).
| Options | |
|---|---|
| ON | OFF |
Select OFF to allow the camera to adjust exposure before each shot taken in burst mode.
SHOOT WITHOUT LENS
Choose ON to enable the shutter release when no lens is attached.
| Options | |
|---|---|
| ON | OFF |
SHOOT WITHOUT CARD
Choose whether the shutter can be released without a memory card inserted in the camera.
| Option | Description |
|---|---|
| ON | When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed. |
| OFF | The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card. |
FOCUS RING
Choose the direction in which the focus ring is rotated to increase the focus distance.
| Options | |
|---|---|
| XCW (clockwise) | YCCW (counterclockwise) |
For some lenses, due to its specific designs or specifications, the setting may not be reflected even if the other option is selected.
FOCUS RING OPERATION
Choose how the camera adjusts focus in response to the movement of the focus ring.
| Option | Description |
|---|---|
| NONLINEAR | Focus is adjusted at the same rate as the ring is rotated. |
| LINEAR | Focus is adjusted linearly according to the amount the ring is rotated, but the focusing speed is unaffected by the speed the ring is rotated. |
For some lenses, due to its specific designs or specifications, the setting may not be reflected even if the other option is selected.
AE/AF-LOCK MODE
This option determines the behavior of the button to which exposure and/or focus lock is assigned.
| Option | Description |
|---|---|
| AE&AF ON WHEN PRESSING | Exposure and/or focus will lock while the button is pressed. |
| AE&AF ON/OFF SWITCH | Exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again. |
AWB-LOCK MODE
Choose the behavior of function buttons assigned auto white balance (AWB) lock. Auto white balance lock is used to lock white balance at the value metered by the camera when AUTO is selected for white balance.
| Option | Description |
|---|---|
| AWB ON WHEN PRESSING | Auto white balance locks while the button is pressed. |
| AWB ON/OFF SWITCH | Press the button once to lock auto white balance and again to end the lock. |
EXPO. COMP. BUTTON SETTING
Control the behavior of the rear command dial and the button to which exposure compensation is assigned. If d ON WHEN PRESSING is selected, exposure compensation can be adjusted by holding the button while rotating dial; if d ON/OFF SWITCH is selected, exposure compensation can be set by pressing the button once, rotating the dial, and then pressing the button again.
| Options | |
|---|---|
| dON WHEN PRESSING | dON/OFF SWITCH |
aFn1 BUTTON SETTING
Choose the role performed by the Fn1 button during playback.
| Option | Description |
|---|---|
| aSMARTPHONE TRANSFER ORDER | Pressing the button marks the current picture for transfer. If the camera is not currently paired with a smartphone, Bluetooth/SMARTPHONE SETTING options will be displayed (aBluetooth/SMARTPHONE SETTING). |
| dSELECT & SMARTPHONE TRANSFER ORDER | Pressing the button displays a dialog where pictures can be selected for upload to a smartphone with which the camera is paired (aIMAGE TRANSFER ORDER). If the camera is not currently paired with a smartphone, Bluetooth/SMARTPHONE SETTING options will be displayed instead (aBluetooth/SMARTPHONE SETTING). |
| rWIRELESS COMMUNICATION | The button can be used for wireless connections. |
TOUCH SCREEN SETTING
Enable or disable touch-screen controls.
xTOUCH SCREEN SETTING
| Option | Description |
|---|---|
| ON | The LCD monitor functions as a touch screen during shooting. |
| OFF | Touch controls disabled. |
xDOUBLE TAP SETTING
| Option | Description |
|---|---|
| ON | Tap the LCD monitor twice to zoom in on your subject during shooting. |
| OFF | Touch zoom disabled. |
cTOUCH FUNCTION
| Option | Description |
|---|---|
| ON | Enable touch-function gestures. |
| OFF | Disable touch-function gestures. |
aTOUCH SCREEN SETTING
| Option | Description |
|---|---|
| ON | The LCD monitor functions as a touch screen during playback. |
| OFF | Touch controls disabled. |
EVF TOUCH SCREEN AREA SETTINGS
Select the area of the LCD monitor used for touch controls while the viewfinder is active. The area used for touch controls can be selected from:
| Option | Description |
|---|---|
| 6 | All. |
| 0 | Right half. |
| 2 | Top right quarter. |
| 4 | Bottom right quarter. |
| 1 | Left half. |
| 3 | Top left quarter. |
| 5 | Bottom left quarter. |
| OFF | Touch controls disabled. |
LOCK ()
Lock selected controls to prevent unintended operation.
LOCK SETTING
Choose from the following:
| Option | Description |
|---|---|
| UNLOCK | Reset lock options. |
| ALL FUNCTION | Lock all controls in the FUNCTION SELECTION list. |
| SELECTED FUNCTION | Lock only the controls selected in the FUNCTION SELECTION list. |
FUNCTION SELECTION
Choose the controls locked when SELECTED FUNCTION is chosen for LOCK SETTING.
The controls selected using SELECTED FUNCTION can be locked at any time during shooting by pressing and holding MENU/OK. To unlock the controls, press and hold the button again.
