Enter a search term and click .

Manual Focus

Adjust focus manually.

  1. Select [MANUAL FOCUS] for G[AF/MF SETTING] > [FOCUS MODE].

  2. Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase.

  3. Take pictures.

Use D[BUTTON/DIAL SETTING] > [LENS ZOOM/FOCUS SETTING] to reverse the direction of rotation of the focus ring.

Regardless of the option selected, manual focus will be used when the lens is in manual focus mode.

Checking Focus

A variety of options are available for checking focus in manual focus mode.

The Manual Focus Indicator

The white line indicates the distance to the subject in the focus area (in meters or feet according to the option selected for D[SCREEN SET-UP] > [FOCUS SCALE UNITS] in the setup menu), the blue bar the depth of field, or in other words the distance in front of and behind the subject that appears to be in focus.

Focus distance(white line)

Depth of field

If both [AF DISTANCE INDICATOR] and [MF DISTANCE INDICATOR] are selected in the D[SCREEN SET-UP] > [DISP. CUSTOM SETTING] list, the manual focus indicator can also be viewed using the depth-of-field indicator in the standard display. Use the [DISP/BACK] button to display standard indicators.

Use the G[AF/MF SETTING] > xF[DEPTH-OF-FIELD SCALE] option to choose how depth of field is displayed. Choose [FILM FORMAT BASIS] to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, [PIXEL BASIS] to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays.

Focus Zoom

If [ON] is selected for G[AF/MF SETTING] > [FOCUS CHECK],the camera will automatically zoom in on the selected focus area when the focus ring is rotated. Press the center of the focus stick (focus lever) to exit zoom.

You can also initiate focus zoom by pressing the center of the focus stick (focus lever).

Use the focus stick (focus lever) to choose another focus area.

Zoom can be adjusted by rotating the rear command dial. Zoom cannot, however, be adjusted when [DIGITAL SPLIT IMAGE] or [DIGITAL MICROPRISM] is selected for MF assist.

MF Assist

Use G[AF/MF SETTING] > [MF ASSIST] in the photo menus or G[AF/MF SETTING] > F[MF ASSIST] in the movie menus to choose a focus check option.

The focus check options for movies differ from those for still photography.

  • [DIGITAL SPLIT IMAGE]

    Displays a split image in the center of the frame. Frame the subject in the split-image area and rotate the focus ring until the four parts of the split image are correctly aligned.

  • [DIGITAL MICROPRISM]

    A grid pattern that emphasizes blur is displayed when the subject is out of focus, disappearing to be replaced by a sharp image when the subject is in focus.

  • [FOCUS PEAK HIGHLIGHT]

    Highlights high-contrast outlines. Rotate the focus ring until the subject is highlighted.

  • [FOCUS METER]

    A meter is displayed below the focus point indicating whether focus is in front of or behind the subject. The needle swings left when focus is in front of the subject and right when it is behind the subject. Adjust focus so the needle is pointing straight up.

    The display reverses when Y[CCW] is selected for D[BUTTON/DIAL SETTING] > [LENS ZOOM/FOCUS SETTING] > [FOCUS RING ROTATE].