.[POWER MANAGEMENT]
Adjust power management settings.
To access power management settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [POWER MANAGEMENT].
[AUTO POWER OFF]
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if [OFF] is selected, the camera must be turned off manually.
| Options | |||||
|---|---|---|---|---|---|
| [5 MIN] | [2 MIN] | [1 MIN] | [30 SEC] | [15 SEC] | [OFF] |
[SHOOTING STAND BY MODE]
Choose the delay before the camera enters shooting standby mode.
| Option | Description |
|---|---|
| [5 MIN] | The camera will suspend all functions and enter powering-saving (standby) mode if no operations are performed for the selected period. To exit shooting standby mode, press the [MENU/OK] button or another control. |
| [2 MIN] | |
| [1 MIN] | |
| [30 SEC] | |
| [15 SEC] | |
| [OFF] | Shooting standby mode disabled. |
[AUTO POWER SAVE]
If [ON] is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls.
| Options | |
|---|---|
| [ON] | [OFF] |
[AUTO POWER OFF TEMP.]
If its temperature rises beyond a certain point, the camera will first display a message and then, if the temperature rise continues, automatically end shooting and power down. Choose the temperature at which the camera turns off automatically.
| Option | Description |
|---|---|
| [STANDARD] | The camera turns off automatically when its temperature reaches the [STANDARD] value. |
| [HIGH] | Shooting can continue at temperatures higher than the [STANDARD] value, extending the time available to record movies and the like. Because remaining in contact with the camera at these high temperatures could result in low-temperature burns, this option should only be used after mounting the camera on a tripod or taking other steps to avoid prolonged contact with the camera. |
