.[RECORDING]
Adjust shooting settings.
[IRIS]
Choose the iris when using a lens with no aperture ring or when the lens aperture ring is in the [C] position. If [AUTO] is selected, the camera automatically adjusts the iris.
[IRIS DISP]
Set the method for displaying the aperture value.
| Options | |
|---|---|
| [T NUMBER] | [F NUMBER] |
[EXP. COMPENSATION]
Adjust the exposure compensation. Set the exposure from -2 to +2 stops in increments of 1/4 EV.
[PHOTOMETRY]
Set the photometry mode.
| Options | |||
|---|---|---|---|
| [MULTI] | [CENTER WEIGHTED] | [SPOT] | [AVERAGE] |
[SELF-TIMER]
Choose whether to use the self-timer. Set the time delay between pressing [REC] and starting the recording.
| Options | |||
|---|---|---|---|
| [OFF] | [3 SEC] | [5 SEC] | [10 SEC] |
[IS SETTING]
Set the image stabilization mode.
[IS MODE]
Set whether to use the lens's optical image stabilization (OIS) and/or the camera’s digital image stabilization (DIS).
| Options | ||
|---|---|---|
| [OIS] | [OIS+DIS] | [OFF] |
[IS MODE BOOST]
Choose the image stabilization level.
| Options | |
|---|---|
| [ON] | [OFF] |
The setting selected with the lens image stabilization switch, if any, takes priority over the setting chosen with the IS mode.
Note that vibration or camera sounds may be noticeable as image stabilization takes effect.
[PERIPHERAL ILLUMINATION CORRECTION]
Set whether to correct the peripheral illumination.
| Options | |
|---|---|
| [ON] | [OFF] |
[MOUNT ADAPTOR SETTING]
Adjust settings when using a mount adapter. Store lens settings individually for [LENS 1] to [LENS 6]. Choose [OFF] to disable corrections.
[LENS REGISTRATION]
Store the lens name.
[FOCAL LENGTH SETTING]
Set the focal length.
[DISTORTION CORRECTION]
Correct "distortion" which causes the edges of the footage to be distorted.
| Options | |||
|---|---|---|---|
| [BARREL STRONG] | [BARREL MEDIUM] | [BARREL WEAK] | [OFF] |
| [PINCUSHION WEAK] | [PINCUSHION MEDIUM] | [PINCUSHION STRONG] | |
[COLOR SHADING CORRECTION]
Adjust color (shading) variations between the center and edges of the footage separately for each corner ([TOP LEFT], [TOP RIGHT], [BOTTOM LEFT], [BOTTOM RIGHT]) within a range from -9 to +9.
[PERIPHERAL ILLUMINATION CORRECTION]
Correct the peripheral illumination of the footage.
| Options | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| -5 | -4 | -3 | -2 | -1 | 0 | +1 | +2 | +3 | +4 | +5 |
[GENLOCK]
If a device that can be synchronized with the Genlock connector is connected and the project FPS is the same, select [ON] to align the phase of the footage to be recorded.
| Options | |
|---|---|
| [ON] | [OFF] |
Synchronization Status
When [ON] is selected, the icon on the screen shows the synchronization status.
| Icon | Description |
|---|---|
 |
Synchronized with other devices. |
 |
Synchronizing in progress, or not synchronized with other devices. |
