.Using the AC Power Adapter
Using the supplied AC power adapter, you can use the camera without the supplied battery, or charge the supplied battery in the camera.
Connect the AC power adapter cable to the DC IN connector of the camera with the red mark on the plug facing up as shown in the figure and then plug the AC cable into an indoor power outlet.
The supplied AC power adapter is compatible with power supplies of 100 to 240 V and can be used overseas (a plug adapter or AC cable may be needed for overseas use).
Do not use the AC power adapter with other devices. Failure to observe this precaution could cause malfunction.
If the supplied battery is in the camera when removing the AC power adapter, the screen display and terminal output will be turned off, and no operation other than turning off the camera can be performed (aAttaching the V-mount Battery).
If the supplied battery is low or the camera is used in a low-temperature environment, removing the AC power adapter could cause the camera to stop functioning, even if the supplied battery is in the camera.
Use only the supplied AC power adapter with the DC IN connector. We cannot guarantee the product if you use an adapter other than the one supplied.
Instead of the AC power adapter, you can also use a V-mount battery to charge the supplied battery (aV-mount Batteries).
When both the AC power adapter and V-mount battery are used, the power from the AC power adapter is prioritized for consumption.
