4. Appendices

FUJIFILM PC AutoSave Menus

To display the menus, click the icon in the taskbar (Windows) or menu bar (Macintosh).

FUJIFILM PC AutoSave offers the following menu options.

Manual Options (for When You Can't Connect Using WPS)

Follow the steps below if you are unable to connect using WPS. The camera will be registered with the FUJIFILM PC AutoSave computer application, allowing it to connect to the computer via a wireless network.

Camera

Computer

1

Click the icon in the taskbar (Windows) or menu bar (Macintosh) and select PC AUTO SAVE SETTING.

 

2

Click MANUAL SETTING.

The “MANUAL SETTING” dialog will be displayed.

 

3

Turn the camera on, highlight PC AUTO SAVE SETTING in the setup menu, and press OK.

The menus displayed on your camera may differ from those shown here.

Highlight MANUAL SETUP and press OK.

 

Proceed to Step A to choose from a list of available networks, Step B to manually enter the network SSID.

A Choosing a Wi-Fi Router

A-1

Highlight SELECT FROM NETWORK LIST and press OK.

The camera will begin searching for Wi-Fi networks.

If no networks are detected, the camera will display an error and return to shooting or playback.

 

A-2

Highlight a network and press OK.

A icon indicates that the network requires a password. After entering the password, highlight SET and press OK.

 

For more information on the password, see the documentation provided with the router. A default password could also be found on sides of the router.

 

 

Connecting to computer

 

A-3

Check the name of the destination computer and press OK.

 

The name of the computer will appear in the “DESTINATION PC” text box.

If the computer name uses non-ASCII characters, the computer software will choose the name.

 

 

 

A-4

Check the destination folder and click OK.

 

 

Destination saved

 

A-5

A message will be displayed when the destination is saved. Press OK to exit to shooting or playback.

Each camera can be configured for use with up to six computers at a time.

If multiple computers are detected in Step A-3, press the selector down to scroll through the list.

 

At default settings, pictures are saved to the following destination folder:

Windows

\Users\(your user name)\Pictures

Macintosh

/Users/(your user name)/Pictures

For information on choosing a different folder, see “Change destination folder”.

A maximum of ten cameras can be registered with the FUJIFILM PC AutoSave computer application.

The computer will add the camera and launch the web browser, where instructions for actually saving photographs and movies will be displayed.

 

B Entering the Network SSID

B-1

Highlight ENTER SSID and press OK.

 

B-2

Enter the SSID. Highlight SET and press OK when entry is complete.

 

For more information on SSID and its password, see the documentation provided with the router. Default values for SSID and its password could also be found on sides of the router.

 

B-3

Highlight the type encryption used by the network and press OK.

 

B-4

Enter the password. When entry is complete, highlight SET and press OK.

 

 

 

Connecting to computer

 

B-5

Check the name of the destination computer and press OK.

 

The name of the computer will appear in the “DESTINATION PC” text box.

If the computer name uses non-ASCII characters, the computer software will choose the name.

 

 

 

B-6

Check the destination folder and click OK.

 

 

Destination saved

 

B-7

A message will be displayed when the destination is saved. Press OK to exit to shooting or playback.

Each camera can be configured for use with up to six computers at a time.

If multiple computers are detected in Step B-5, press the selector down to scroll through the list.

 

At default settings, pictures are saved to the following destination folder:

Windows

\Users\(your user name)\Pictures

Macintosh

/Users/(your user name)/Pictures

For information on choosing a different folder, see “Change destination folder”.

A maximum of ten cameras can be registered with the FUJIFILM PC AutoSave computer application.

The computer will add the camera and launch the web browser, where instructions for actually saving photographs and movies will be displayed.

 

Installing a New Router

To adjust network settings or choose a new destination folder, select PC AUTO SAVE SETTING in the FUJIFILM PC AutoSave menu. After connecting via a new Wi-Fi router, check the camera name and destination folder in the dialog shown.

Removing Destinations from the Camera

Follow the steps below to remove destinations from the camera.

1 Highlight WIRELESS SETTINGS in the camera setup menu and press OK.

The menus displayed on your camera may differ from those shown here.

 

2 Highlight PC AUTO SAVE SETTINGS and press OK.

 

3 Highlight DELETE REGISTERED DESTINATION PC and press OK.

 

4 Select a destination for deletion.

Highlight the destination in the destination list and press OK.

 

5 Delete the selected destination.

A confirmation dialog will be displayed;
highlight OK and press OK to delete the selected destination.

Error Messages

The camera may display any of the following error messages.

For More Information

More information is available from the following links.